
P6SD Air Conditioner Packs 5 Tons Or Less Q6SD Heat Pump Packs 5 Tons Or Less 208/230V & 460V
The Mammoth Light Commercial P6SD series of packaged air conditioning units and Q6SD series of packaged heat pumps offer quality cooling (and heating) in 3, 4 & 5 tons of capacity. Both models are available as horizontal or downflow configurations – allowing for convenient installation in any application. They also come in either 208V/230V or 460V, 3-phase capabilities. Both models come in a compact footprint, which allows for easy handling and transport.
A heating or cooling system is only as strong as the parts inside. These units include proven, industry-standard components that make them easier to service and the parts readily available. In addition, the heavy-duty jacket coated in a quality finish protects the interior of the system and can aid in extending system life through corrosion resistance. All-in-all, this makes for a high-quality, durable packaged unit.
Additional features of the P6SD and Q6SD:
- Quality Compressor: State-of-the-art scroll compressor comes standard.
- R-410A Refrigerant: Compatible with Earth-friendly, non-ozone-depleting R-410A refrigerant.
- TXV: The TXV is externally equalized and provides precise refrigerant control under varying load conditions.
- High Pressure Switch: Protects against abnormally high system pressures.
- Compact Footprint: Easy to handle and transport.
- Convertible Air Delivery as Shipped: Horizontal or downflow configurations to accommodate rooftop or horizontal applications.
- Heavy-Gauge, Full-Perimeter Base Rails: Setup facilitates forklift handling and curb mounting.
- Galvanized Steel Case Coated in a Polyester-Urethane Finish: Coating provides a minimum of 950-hour salt spray tested protection to resist instances of corrosion.
- Plastic Mesh Hail Guard: Component is rust resistant and protects the coil from damage caused by hail and more.
- Quiet Operation: Operates at low vibration and sound levels due to a 20” fan blade combined with a custom condenser fan orifice.
Literature:
- Line Card
- Consumer Brochure
- P6SD-X 3-Phase Tech Spec
- P6SD-X Single-Phase Tech Spec
- Q6SD-X 3-Phase Tech Spec
- Q6SD-X Single-Phase Tech Spec
(Note: Features may vary between the heat pump and air conditioning models. Make sure to consult the technical literature for a complete list of additional, model-specific features.)

P6SP Series 6, 7.5 & 10 Ton Packaged Air Conditioner and Q6SP Series 7.5 & 10 Ton Packaged Heat Pump, 3 Phase, 208V/230V & 460V
The Mammoth Light Commercial P6SP series of air conditioning units and Q6SP series of heat pumps offer quality performance. These two models are designed specifically for retrofit applications and will fit most standard footprints. These units come in two voltage options – 208V/230V and 460V. With a convertible air delivery kit, these packaged units can be converted to work with ground unit replacements. The air conditioning model is available in 6, 7.5 and 10 tons of capacity, while the heat pump is available in 7.5 and 10 tons of capacity.
In addition to making convenient replacements and providing installation flexibility, these units hold up over time. They contain features like a galvanized steel shell and reliable coils for increased durability. These units are also easy to install and include a full-perimeter base rail that facilitates forklift use. This makes the unit convenient for both contractors and end users alike.
Additional features of the P6SP and Q6SP:
- Quality Compressor: State-of-the-art scroll compressor comes standard.
- Copper Tube/Aluminum Fin Coils: Both the indoor and outdoor coils in this unit are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
- Plastic Mesh Hail Guard: Component is rust resistant and protects the coil from damage caused by hail and more.
- Permanently Lubricated Condenser Fan Motor: Includes a heavy-duty PSC motor for long-lasting reliability and quiet operation. It requires no maintenance and is completely protected from rain and snow.
- Convertible Air Delivery with Kit: Converts to horizontal airflow with side panels including duct flange and bottom close-off panels with kit.
- High and Low Pressure Switches: The switches ensure long compressor life and feature manual reset, high-pressure control.
- Two-Stage Cooling: 7.5 and 10 ton models offer two-stage cooling operation for more even temperatures.
- 75 VA Transformer: Includes 4 amp circuit breaker to protect low voltage circuit.
- Freeze Protection Thermostats: Provides reliable compressor operation.
- Crankcase Heater: Helps prevent damaging, flooded starts in the compressor.
Literature:
(Note: Features may vary between the heat pump and air conditioning models. Make sure to consult the technical literature for a complete list of additional, model-specific features.)

JS4BD Split-System Air Conditioner and JT4BD Split-System Heat Pump, 3, 4 & 5 Ton, 3 Phase, 208V/230V & 460V
The Mammoth Light Commercial JS4BD series of split-system air conditioners and JT4BD series of split-system heat pumps offer quality cooling (and heating) and are available in 3, 4, and 5 ton capacities. These systems come in an option of either 208V/230V or 460V. These light commercial split-system varieties are designed for either ground or rooftop mounting, offering easy installation in any application. For premium performance, these systems should be properly paired with Mammoth Light Commercial engineered coils or air handlers.
Heating and cooling equipment should be long-lasting and reliable. The high-pressure switch in these units helps protect against high system pressure and unnecessary service calls while Micro-Channel coils in the air conditioning model increase system reliability. Durable design and high-quality components are just two ways that these models provide quality performance.
Additional features of the JS4BD and JT4BD:
- Galvanized Steel Case Coated in a Polyester-Urethane Finish: Coating provides a minimum of 950-hour salt spray tested protection to resist instances of corrosion.
- Permanently Lubricated Condenser Fan Motor: Includes a heavy-duty PSC motor for long-lasting reliability and quiet operation. It requires no maintenance and is completely protected from rain and snow.
- Micro-Channel Coils: All-aluminum outdoor coil, in the air conditioning model, is designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
- Full-Service Valves: These brass valves are easily accessible and simplify the servicing of the refrigerant system.
- High Pressure Switch: Protects against abnormally high system pressures. The auto-reset feature helps prevent unnecessary service visits.
- Liquid Line Filter Drier: Included with the unit, but field installed.
- Removable Top Grille Assembly: Allows for ease of service from the top without disconnecting the fan motor leads.
Literature:
- Line Card
- Consumer Brochure
- B6BMMO Tech Specs
- C6 Coil Tech Spec
- C7 Coil Tech Spec
- JS4BD Tech Spec
- JT4BD Tech Spec
(Note: Features may vary between the heat pump and air conditioning models. Make sure to consult the technical literature for a complete list of additional, model-specific features.)

S5BP Split-System Air Conditioner and T5BP Split-System Heat Pump, 3-Phase, 7.5 & 10 Tons, 208V/230V & 460V
The Mammoth Light Commercial S5BP series of split-system air conditioners and T5BP series of split-system heat pumps deliver high-quality cooling (and heating) performance when paired with Mammoth Light Commercial air handlers. These models come in either 7.5 tons or 10 tons of capacity and either 208V/230V or 460V. In addition, they are sized for both ground and rooftop mounting.
The design of these split system units promotes installation flexibility and simple servicing for contractors. Every unit offers easy access to all crucial components and fail-safes that ensure crucial components continue working effectively for years – increasing end-user satisfaction and lessening burdens on contractors.
Additional features of the S5BP and T5BP:
- Quality Compressor: State-of-the-art scroll compressor comes standard and provides single-stage operation.
- Galvanized Steel Case Coated in a Polyester-Urethane Finish: Coating provides a minimum of 950-hour salt spray tested protection to resist instances of corrosion.
- High and Low Pressure Switches: The switches ensure long compressor life.
- Copper Tube/Aluminum Fin Coils: Both indoor and outdoor coils are designed to optimize heat transfer, minimize size and cost, and increase durability and reliability.
- Permanently Lubricated Condenser Fan Motor: A heavy-duty PSC motor for long-lasting reliability and quiet operation. It requires no maintenance and is completely protected from rain and snow.
- 90 VA Transformer: Includes 4 amp circuit breaker to protect low voltage circuit.
- Plastic Mesh Hail Guard: Component is rust resistant and protects the coil from damage caused by balls, lawnmowers, hail and more.
- Liquid Line Filter Drier: Field installed for convenience.
- Suction Accumulator and Crankcase Heater: Protection from liquid floodback and future compressor failures.
Literature:
(Note: Features may vary between the heat pump and air conditioning models. Make sure to consult the technical literature for a complete list of additional, model-specific features.)