BAPI – Temperature

Temperature

BAPI-Stat 4 Room Unit with Display

BAPI-Stat 4 Room Unit with Display

Features & Options

  • Patented Enclosure Style with Large Display
  • Robust Tactile Pushbuttons
  • Setpoint Adjust (Slider or Pushbutton)
  • Optional Override, Fan Speed & Mode Control
  • Optional Communication Jack and Test & Balance
  • Two Year Warranty

The patented BAPI-Stat 4 Style Enclosure features a large LCD with all the visual indicators on the display itself. It provides local indication of Temperature and Setpoint with Setpoint Adjust and Override.

It also has optional Fan Speed and Mode Control for applications with Fan Coils, Heat Pumps or Unit Ventilators. The Setpoint is available as a slidepot or as pushbuttons and is displayed on the LCD for a short time after an adjustment.

The Override is a momentary signal that can be configured in parallel with the sensor or setpoint, or as a separate output or a latching switch. An optional 3.5mm (1/8”), RJ11 or RJ22 Communication Jack can be mounted in the base to provide direct access to the network.

Literature

BAPI-Stat 2 Room Unit with Display

BAPI-Stat 2 Room Unit with Display

Features & Options

  • Patented BAPI Enclosure Style
  • Robust Tactile Pushbuttons
  • Large Display with Multiple Indicators
  • Occupancy Override
  • Slider or Pushbutton Setpoint Adjustment
  • Optional Fan Speed & Mode Control
  • Optional Communication Jack and Test & Balance
  • Wide Selection of Temp. Sensing Elements
  • Two Year Warranty

The patented BAPI-Stat 2 unit features a large LCD with all the indicators on the display itself. It provides local indication of Temperature and Setpoint with Setpoint Adjust and Override. It also has optional Fan Speed and Mode Control for applications with Fan Coils, Heat Pumps or Unit Ventilators.

The Setpoint is available as a slidepot or as pushbuttons and is displayed on the LCD for a short time after an adjustment. The Setpoint can be displayed as an offset (i.e. -2, -1, 0, 1, 2) or as a value within a specified temperature range (i.e. 65 to 80°F). The Override is a momentary signal that can be configured in parallel with the sensor or setpoint, or as a separate output or a latching switch. An optional 3.5mm (1/8”) or RJ11 Comm Jack can be mounted in the base for direct access to the network.

Literature

RµP Room Unit

RµP Room Unit

Features & Options

  • Delta Style Enclosure with Robust Tactile Pushbuttons
  • Digital Display and Pushbutton Setpoint Adjustment
  • Optional Occupancy Override with LED
  • Optional Communication Jack and Test & Balance
  • Wide Selection of Temperature Sensing Elements
  • Two Year Warranty

The RµP family of sensors provide local indication of Temperature and Setpoint with Setpoint Adjust and Override. An optional 3.5mm (1/8”) or RJ11 comm jack can be mounted in the base to provide direct access to the network. The Setpoint is displayed for a short time after an adjustment.

The Setpoint can be programmed to display as an offset (i.e. -2 to 2) or as a value within a specified temperature range (i.e. 65 to 80 °F) and includes a user selectable setpoint lockout. The Override is a momentary signal that can be configured in parallel with the Sensor, Setpoint or as a separate output.

Literature

RµPM Room Unit

RµPM Room Unit

Features & Options

  • Delta Style Enclosure with Robust Tactile Pushbuttons
  • Setpoint Adjust & Occupant Override
  • Optional Fan Speed and Mode Control
  • Optional Communication Jack and Test & Balance
  • Wide Selection of Temperature Sensing Elements
  • Two Year Warranty

Designed for use in applications with Fan Coils, Heat Pumps, Unit Ventilators and other Terminal Units, the RµPM provides local indication of Temperature and Setpoint with Setpoint Adjust, Override, Fan Speed or Mode options. An optional Communication Jack can be mounted in the base to provide direct access to the network. The Setpoint is displayed for a short time after an adjustment.

The Setpoint can be programmed to display as an offset (i.e. -2, -1, 0, 1, 2) or as a value within a specified temperature range (i.e. 65 to 80 °F). The Override is a momentary signal that can be configured in parallel with the Sensor or Setpoint. Fan Speed or Mode are provided as a single analog output (resistive) and include LED indicators.

Literature

RµPS Room Unit

RµPS Room Unit

Features & Options

  • Delta Style Enclosure with Display
  • Optional Slider Setpoint Adjustment
  • Optional Pushbutton Occupancy Override with LED
  • Optional Communication Jack and Test & Balance Switch
  • Wide Selection of Temperature Sensing Elements
  • Two Year Warranty

The RµPS sensor provides measurement and display of local temperature with Setpoint Adjust and Occupancy Override. Room temperature is displayed on an easy-to-read LCD readout. The Setpoint Adjust is a vertical slidepot which provides an analog output and comes with a Warm/Cool legend imprinted on the unit’s base (Optional setpoint indication is available).

Setpoint values are transmitted as resistive or voltage values for easy configuration with the controller. The Override is a momentary signal that can be configured as a direct output or in parallel with the Sensor or Setpoint. An optional 3.5mm (1/8”), RJ11 or RJ22 comm. jack can be mounted in the base. The sensor and setpoint outputs can be configured for “common ground” or “differential” controller inputs.

Literature

BAPI Room Units Without LCD

BAPI Room Units Without LCD

Features & Options

  • BAPI-Stat 4, BAPI-Stat 2 and Delta Style Enclosures
  • Optional Setpoint, Override, Comm. Jack and Test & Balance Switch
  • Limited Lifetime Warranty

Setpoint & Legend

The optional setpoint is a linear slidepot adjustment that comes in various ranges, reverse or direct acting. An optional setpoint legend can be imprinted on the base of the enclosure. Common Legends include “Cool/Warm”, “55 to 85” and “5 to 30”.

Override

The optional override is a discreet momentary signal that can be configured to be compatible with any controller.

Communication Jack

Available with RJ11 (4 pin), RJ12 (6 pin), RJ22 (4 pin) or a 3.5 mm phono plug style jack.

Test and Balance Switch

A 3-position switch is available to change the sensor output as follows: “Low” is a cold reading of ˜ 40°F, “Normal” is the live sensor value, and “High” is a hot reading of ˜ 105°F.

Literature

Decora Style Room Unit

Decora Style Room Unit

Features & Options

  • LCD Readout of Local Temperature
  • Setpoint Adjustment (optional)
  • Decora Style Enclosure
  • °F or °C Indication (field selectable via setpoint pushbuttons)
  • Wide Selection of Temperature Sensing Elements

The low profile Decora Style Room Unit fits inside a Decora Style Wall Plate. It features measurement and display of local temperature with optional pushbutton setpoint adjustment. The room temperature is shown on an easy-to-read LCD display in either °F or °C (field selectable via front pushbuttons for setpoint models).

The Setpoint values are transmitted as resistive values for easy configuration with the controller. The sensor and setpoint outputs can be configured for “common ground” or “differential” controller inputs.

Literature

Low Profile Button Sensor

Low Profile “Button” Sensor

Features & Options

  • Small Flush Sensor Mounting
  • Accurate Direct Air Measurement
  • Paintable with Latex or Oil Base
  • Wide Selection of Sensing Elements
  • Limited Lifetime Warranty

The Low Profile “Button” Sensor is ideal for locations where aesthetics are as important as the temperature measurement. The inconspicuous wall sensor mounts easily by pushing through a 7/16″ hole and secured with a peel off tape strip. The only visible portion is a flush 7/8″ dot on the wall.

The Low Profile “Button” Sensor is available in multiple thermistor or RTD sensors as shown in the specifications. Other sensor types are available on request.

Literature

BAPI-Stat & BAPI-Stat 3 Room Units

BAPI-Stat & BAPI-Stat 3 Room Units

Features & Options

  • Designed for Operating Rooms and Clean Rooms
  • Temperature and Humidity Setpoint Adjustment
  • Large Easy-to-Read Display
  • Membrane Pushbuttons for Wipedown Cleaning
  • 2% RH Accuracy
  • Two Year Warranty

The BAPI-Stat and BAPI-Stat 3 are designed for operating rooms, clean rooms and elder care facilities. They feature a large display and membrane pushbuttons for wipedown cleaning. They are available with temperature and humidity measurement, temperature and humidity setpoint and occupant override.

The units include a number of field adjustments including °F or °C display, temperature and humidity offset and setpoint lockout. The display can also be set to show a large temperature and small %RH reading, a large %RH and a small temperature reading, or to alternate between the two.

This unit can be configured with up to four transmitted variables. Contact your BAPI representative for details.

Literature

BAPI-Stat 4 X-Combo Room Unit

BAPI-Stat 4 “X-Combo” Room Unit

Features & Options

  • Large Easy-to-Read Display, °F or °C
  • Fully Compensated 2% RH Sensor
  • Temperature and Humidity Setpoint Adjustment
  • Adjustable Toggle Rate Between Temp and Humidity Display
  • Optional Override, Passive Sensor, Test and Balance Switch and Communication Jack
  • Two Year Warranty

The BAPI-Stat 4 “X-Combo” Room Unit features local indication of both temperature and humidity with optional Temperature Setpoint, Humidity Setpoint and Local Occupancy Override. The optional LCD shows room temperature in °C or °F and room humidity in %RH. In addition, the unit has adjustable offsets for both temperature and humidity and the transmitter ranges are field configurable.

The unit has 4 output channels. Channel 1 and 2 can be ordered as voltage or current, channel 3 as voltage or resistance and channel 4 as a passive temperature sensor.

Literature

T1K Transmitter Room Unit

T1K Transmitter Room Unit

Features & Options

  • Delta Style, BAPI-Stat 2 or BAPI-Stat 4 Enclosures
  • 4 to 20 mA Temperature Output
  • Optional Display on the BAPI-Stat 4
  • Optional Override and Setpoint on the BAPI-Stat 2 & BAPI-Stat 4
  • Optional Communications Jack
  • Two Year Warranty

The T1K Transmitter Room Unit comes in the Delta style, BAPI-Stat 2 and BAPI-Stat 4 style enclosures. They measure the room temperature and output a 4 to 20mA signal per the custom range selected at the time of order.

The BAPI-Stat 4 Style unit offers a full range of options including setpoint, override, display, communication jack, field offset, field ranging, ºF or ºC and a new stylish look.

The BAPI-Stat 2 is available with the same options except display, while the Delta Style is a simplified unit with temperature measurement only.

Literature

BAPI-Com, Two-wire Multifunction Sensor

BAPI-Com, Two-wire Multifunction Sensor

Features & Options

  • Power and Communication on Just Two Wires
  • Available with Temperature Setpoint and Optional Override, Display and %RH Sensing
  • Thermistor, Voltage, Resistance or Dry Contact Outputs
  • Up to 500 Foot Wire Runs — Perfect for Existing Wires

Many existing buildings have two wire sensors that lack the features people expect in today’s sophisticated systems. The BAPI-Com uses those existing two wires and offers the owner a full function sensor with temperature setpoint, occupant override, an optional easy-to-read display and optional %RH sensing. This retrofit sensor can update old systems to a new look without pulling new wire or disrupting the occupants while saving on labor.

The sensors are powered and communicate over two wires to a Communication Output Module for use by a BAS system. The outputs are configurable as a thermistor, voltage, resistance or dry contact override output. The sensor is powered by the Communication Output Module which itself is supplied by any 24VDC/VAC source.

Literature

Echelon Compatible L-Temp

Echelon Compatible “L-Temp”

Features & Options

  • Optional Setpoint, Display, Override and Fan Speed
  • °C or °F Operation (user selectable)
  • Onboard Neuron® 3120® Chip
  • Standard 4-Wire Termination
  • Two Year Warranty

BAPI’s Echelon® compatible “L-Temp” Unit features measurement and display of local temperature (°C or °F), as well as display of outdoor temperature and outdoor humidity– all in one package.

An onboard Neuron® chip allows connection directly to a LonWorks® network using star, bus, or loop topology. Additional options include Temperature Setpoint, Local Override and Fan Speed Control for Fan Coils, Heat Pumps, Unit Ventilators or other Terminal Units. The Fan Speed is provided as a Network Variable and includes LCD Indicators.

Literature

Wall Plate Units

Wall Plate Units

Features & Options

  • Etched Teflon Leadwires and Foamback Insulator
  • Several Material, Finish and Color Options
  • Wide Selection of Temperature Sensing Elements
  • Limited Lifetime Warranty

Wall Plates are ideal for areas where a discreet, rugged zone sensor is required. All Wall Plates feature ¼” closed cell foam backing which covers the plate and insulates it from wall temperature. All units also feature etched Teflon leadwires and double encapsulated sensors to create a watertight package that can perform in the real world.

Override

A momentary Override is available as a Keyswitch or three styles of Pushbutton — Standard, Durable & Low Profile. The Standard model features a small, momentary pushbutton while the Durable model features a larger and stronger momentary pushbutton. The Low Profile Model is water resistant for washdown/wipedown applications and is available with a red or green LED indicator.

Communication Jack

An optional 3.5mm phono-style Communication Jack is available.

Color and Finish Options

Standard Wall Plates are available in aluminum or stainless steel with a metallic finish; however, many other color and finish options are available as special orders. Call BAPI for details.

Literature

Wall Plate with Rotary Setpoint

Wall Plate with Rotary Setpoint

Features & Options

  • Stainless Steel Wall Plate
  • Rotary Setpoint Adjustment
  • Occupant Override Pushbutton (optional)
  • 3.5 mm Communication Jack (optional)
  • Pressure Pickup Port (optional)
  • Wide Selection of Temperature Sensing Elements
  • Limited Lifetime Warranty

Rotary Setpoint & Legend

The Rotary Setpoint is a linear adjustment that comes in various ranges, and is available as reverse or direct acting. A Setpoint Legend can be imprinted on the face of the Wall Plate. The standard legends is “–” to “+”. Custom legends are also available, please call BAPI for details.

Override Pushbutton

The optional Override is a discreet momentary signal that can be configured to be compatible with any controller. It is available in three styles — Standard, Durable or Low Profile (with or without an LED override indicator). All Low Profile pushbuttons are water resistant for washdown/wipedown cleaning.

Communication Jack

An optional 3.5 mm phono plug style comm. jack is also available.

Pressure Pickup Port

An optional Pressure Pickup Port is also available.The brass fitting on the back accommodates 1/8” to 5/32” tubing.

Literature

Duct Units

Duct Units

Features & Options

  • Series 304 Stainless Steel Probes: 2”, 4”, 8”, 12” and 18”
  • Several Enclosure Styles
  • Double Encapsulated Sensors & Etched Teflon Leadwires
  • Limited Lifetime Warranty
  • Wide Selection of Temperature Sensing Elements

Single Point Duct Units feature closed cell foam to seal the probe insertion hole and to absorb vibration. Mounting tabs allow for easy installation directly to the wall of the duct.

All Duct Units have etched Teflon leadwires and double encapsulated sensors to create a watertight package that can withstand high humidity and condensation and perform under real world conditions. Duct Units have probe lengths from 2” to 18” to accommodate most duct shapes and sizes. Custom probe lengths are also available.

Duct Units come standard with a 2”x4” steel J-Box but are also available with no box or four styles of enclosure: the metal Weatherproof, the UV-resistant polycarbonate BAPI-Box and BAPI-Box 2 or nylon & ABS plastic BAPI-Box 4.

Literature

Duct Averaging Units

Duct Averaging Units

Features & Options

  • Averaging Lengths: 8’, 12’ and 24’
  • Several Enclosure Styles
  • Limited Lifetime Warranty
  • Wide Selection of Temperature Sensing Elements

BAPI Duct Averaging Units feature closed cell foam to seal the probe insertion hole and absorb vibration. Mounting tabs allow for easy installation directly to the wall of the duct. All units have etched Teflon leadwires and encapsulated sensors to create a watertight package that can perform under real world conditions.

Averaging probes should be used wherever there is a chance for stratified layers of hot and cold air. Averaging probes are made of bendable aluminum tubing and measure temperature along their entire length. Nylon tie straps are provided for mounting.

Duct Averaging Units come standard with a 2”x4” steel J-Box but are also available with No Box, a BAPI-Box 4 or three watertight enclosures: Weatherproof, BAPI-Box or BAPI-Box 2. BAPI also offers optional liquid-tight fittings.

Literature

Rigid Averaging Units

Rigid Averaging Units

Features & Options

  • Averaging Lengths: 12”, 2’ and 4’
  • Several Enclosure Styles
  • Wide Selection of Temperature Sensing Elements

BAPI Rigid Averaging Units feature closed cell foam to seal the probe insertion hole and absorb vibration. Mounting tabs allow for easy installation directly to the wall of the duct. All units have etched Teflon leadwires and encapsulated sensors to create a watertight package that can perform under real world conditions.

Averaging probes should be used wherever there is a chance for stratified layers of hot and cold air. Averaging probes are made of 1/4” diameter stainless steel tubing.

Rigid Averaging Units come standard with a 2”x4” steel J-Box but are also available with No Box, an ABS plastic BAPI-Box 4 or three watertight enclosures: the metal Weatherproof and the UV-resistant polycarbonate BAPI-Box and BAPI-Box 2. BAPI also offers optional liquid-tight fittings.

Literature

Submersible Duct Units

Submersible Duct Units

Features & Options

  • 304 Stainless Steel Probes: 12”, 18”, 24”, 36” & 48” lengths
  • Very Thin Probe to Fit Between Coil Fins
  • Five Enclosure Styles

Submersible Duct Units feature closed cell foam to seal the probe insertion hole and absorb vibration and mounting tabs for easy installation. All units have etched Teflon leadwires and encapsulated sensors to create a watertight package that can perform under real world conditions.

Submersible Duct Units are available in proble lengths of12”, 18”, 24”, 36” and 48”. Custom probe lengths are also available.

Submersible Duct Units come standard with a 2”x4” steel J-Box but are also available with No Box, a BAPI-Box 4 or three watertight enclosures: Weatherproof, BAPI-Box or BAPI-Box 2. BAPI also offers optional liquid-tight fittings.

Literature

Submersible Averaging

Submersible Averaging

Features & Options

  • Waterproof, Copper-Cased Element
  • Continuous Averaging (RTD models only)
  • Averaging Lengths: 2’, 4’ and 8’
  • Wide Selection of Temperature Sensing Elements

Submersible Averaging Units feature closed cell foam to seal the probe insertion hole and absorb vibration and mounting tabs allow for easy installation. All Units have etched Teflon leadwires and encapsulated sensors to create a watertight package that can withstand high humidity and perform under real world conditions.

Averaging probes should be used wherever there is a chance for stratified layers of hot and cold water. Averaging probes are made of bendable copper tubing and measure temperature along their entire length.

These units come standard with a 2”x4” steel Junction Box but are also available with No Box, a BAPI-Box 4 or three watertight enclosures: Weatherproof, BAPI-Box or BAPI-Box 2. BAPI also offers optional liquid-tight fittings.

Literature

Immersion Probes with nylon fitting

Immersion Probes with nylon fitting

Features & Options

  • Probe Lengths: 2”, 4” & 8” (fit standard BAPI Thermowell lengths)
  • Series 304 Stainless Steel Probes and Six Enclosure Styles
  • Double Encapsulated Sensors & Etched Teflon Leadwires

Immersion Units are available in 2”, 4” and 8” probe lengths. The sensor is potted inside a 1/4” stainless steel probe with thermally conductive compound. All Immersion Units have etched Teflon leadwires and double encapsulated sensors to create a watertight package that can withstand high humidity and condensation.

Immersion Units come standard with a 2”x4” steel J-Box but are also available with a BAPI-Box 4 or three styles of watertight enclosure: Weatherproof, BAPI-Box or BAPI-Box 2. BAPI also offers optional liquid-tight fittings.

Literature

Immersion Probes with stainless steel fitting

Immersion Probes with stainless steel fitting

Features & Options

  • Probe Lengths: 2”, 4” and 8” (fit standard BAPI Thermowell lengths)
  • Series 304 Stainless Steel Probes
  • Double Encapsulated Sensors
  • 3 Optional Watertight Enclosures
  • Wide Selection of Temperature Sensing Elements

Immersion Units are available in 2”, 4” and 8” probe lengths. This unit is provided with a 1/4” stainless steel probe and a 1/2” NPT double-ended stainless steel fitting.

The sensors are potted inside the probe with a thermally conductive compound. All units have etched Teflon leadwires and double encapsulated sensors to create a watertight package that can withstand high humidity and condensation. Immersion Probes are available with a watertight BAPI-Box, BAPI-Box 2 or a Weatherproof enclosure.

Literature

Thermowells

Thermowells

Features & Options

  • Three Lengths: 2”, 4” and 8” (Fit standard Immersion Unit lengths)
  • Stainless Steel (304 or 316) or Brass
  • Two Part (Welded) or Machined Construction
  • Other Lengths Available Upon Request
  • Limited Lifetime Warranty

Standard Thermowells available from BAPI include 304 stainless steel (machined), 316 stainless steel (machined), brass (machined), and two part* (welded) 304 stainless steel. These wells are offered in 2”, 4” and 8” lengths with 1/2” NPT external and 1/2” NPSM internal. Other lengths and thread diameters are available upon request.

The Thermowell chosen for an installation is governed mainly by the corrosion conditions the well will face. The machined stainless steel wells all come with a mirror polish to provide maximum corrosion resistance.

Occasionally, the material consideration is one of strength rather than corrosion. For example, a machined stainless steel well may be required for high pressure water service where otherwise a brass or two part stainless steel well would be satisfactory from a corrosion standpoint.

Note: The two part welded stainless steel thermowells are not intended for service in moving water. They may be used in catch basins, sumps or large storage tanks with small inlet and outlet pipes. Do not mount the two part welded stainless steel thermowells close to the inlet or outlet pipe of the tank.

Literature

Extreme Temp. Platinum RTDs - Immersion & Remote

Extreme Temp. Platinum RTDs – Immersion & Remote

Features & Options

  • Stainless Steel Probe & Industrial Construction
  • Double-ended 1/2” NPT Stainless Steel Fitting
  • Optional Weatherproof Enclosure
  • Standard or Outside Mount Configurations

The Extreme Temperature Platinum RTD Units are designed for use in applications from -200°C to 600°C. They are packaged to handle vibration, moisture, and wide temperature ranges.

The Immersion Unit has a stainless steel probe with a 1/2” NPT double-ended stainless steel fitting. It is available with a cast aluminum Weatherproof enclosure.

The Remote Unit has a stainless steel probe with PTFE jacketed cable or fiberglass insulated leads and is available as a probe alone or with a BAPI-Box, BAPI-Box 2, BAPI-Box 4 or Weatherproof enclosure.

These units can be used with a remote mounted BAPI ruggedized temp transmitter to provide a linear proportional 4 to 20 mA output.

Literature

Strap Units and Remote Probe Units

Strap Units and Remote Probe Units

Features & Options

  • Clamp-On, Strap On or Remote Probe Options
  • Double Encapsulated Sensors
  • Wide Selection of Temperature Sensing Elements

These units are designed to monitor water temperature in retrofit or filled pipe applications. The strap units fit around the outside of a pipe, greatly reducing installation cost, while the remote probes are strapped directly onto the pipe.

All three units measure the water temperature by sensing the surface temperature of the pipe. The Strap Units have etched Teflon leadwires and come standard with a Junction Box enclosure. The Clamp-On Unit and the Remote Probes are available with an optional BAPI-Box 4 or a watertight BAPI-Box or BAPI-Box 2 enclosure. The Spring-Loaded Unit is available with an optional BAPI-Box 4 or BAPI-Box 2 enclosure.

Clamp-On Strap – This unit has a bendable copper sensing plate which forms to the curvature of the pipe. An adjustable hose clamp holds the unit in place around the pipes up to 4.5”.

Spring-Loaded Strap – Instead of removing the pipe insulation, the spring loaded sensing pad is held against the pipe through a hole cut in the insulation. It can be used with pipes up to 14.5” with up to 2” of insulation.

Remote Probes – These units have a 1.75” long stainless steel probe with either Plenum-Rated Cable or FEP-Jacketed Cable with a lead length of 18” (Other lengths are available by calling BAPI). Remote Probes are ideal for strap-on applications on any size pipe, or hard-to-access areas.

Literature

Outside Air Units

Outside Air Units

Features & Options

  • Quick-Response Sensor
  • Well-Vented, Light-Colored Sensor Guard
  • Four Watertight Enclosure Styles
  • Wide Selection of Temperature Sensing Elements

Outside Air Units are designed to be mounted outdoors. The UV-resistant plastic shield keeps the sensor out of the sunlight and allows for excellent air circulation. The units are available in a cast aluminum Weatherproof enclosure which carries a NEMA 3R rating or a BAPI-Box or BAPI-Box 2 which are made of UV-resistant polycarbonate and carry an IP66 rating. BAPI also offers optional liquid-tight fittings.

All Outside Air Units have etched Teflon leadwires and can withstand high humidity and condensation and perform under real world conditions. This is especially important in an outside air application which can be exposed to rain, snow and large temperature swings.

Literature

Remote Sensors & Probes

Remote Sensors & Probes

Features & Options

  • Etched Teflons Leads on Remote Sensors
  • Plenum Cable or FEP Cable on Remote Probes
  • Double Encapsulated Sensors on Remote Probes

BAPI Remote Sensors feature a .75” long encapsulation shell and etched Teflon leads in lengths of 6”, 18”, 5’, 10’, 15’, 20’, and 25’. Remote Sensors are perfect for tight locations. Additional cable options, lead lengths and probe styles are available.

Remote Probes feature a 1.75” long stainless steel probe with either Plenum-Rated Cable or FEPJacketed Cable. Lead lengths are 18”, 5’, 10’, 15’, 20’, and 25’. Remote Probes are commonly used in refrigerated case or strap-on applications. They are ideal for hard-to-access areas or spaces where the usual Immersion or Duct Sensors do not fit well. Additional cable options, lead lengths and probe styles are available upon request.

Remote Sensors and Probes are available with a Weatherproof, BAPI-Box, BAPI-Box 2 or BAPI-Box 4 Enclosure.

Literature

4 to 20 mA Temperature Transmitters

4 to 20 mA Temperature Transmitters

Features & Options

  • Almost 500 Ranges Predefined and Custom Ranges Available
  • Calibration Range from -148ºF to 900ºF
  • Fully Encapsulated with Multiple Mounting Configurations
  • Terminal or Flying Lead

BAPI’s loop powered 4 to 20mA temperature transmitters feature a 1,000O Platinum RTD (385 curve) and are available in a wide selection of temperature ranges or custom ranges.

They mount in a variety of enclosures to accommodate any application and terminate with flying leads or terminal screws. The unit is fully encapsulated (ruggedized) with a high thermal conductivity material to prevent circuit overheating and is water resistant.

Literature

Thermobuffer

Thermobuffer

Features & Options

  • Slows/Buffers Temperature Changes in Coolers & Freezers (Caused by Opening and Closing of Cooler/Freezer Door)
  • Fluid-Filled Chamber to Mimic Core Temperatures
  • Easy Wall Mount or Wire Shelf Hanger
  • Decreases False High Limit Alarms
  • Available in Stainless Steel or Aluminum

The BAPI Thermobuffer Temperature Sensor is used to simulate more closely the refrigerator contents rather than the refrigerator air temperature. The fluid-filled chamber allows for slower reaction to abrupt temperature changes, yet still maintains long-term accuracy if the change remains permanent. It eliminates the temperature spikes due to frequent refrigerator or freezer door opening and decreases false alarms.

The Thermobuffer comes in three buffer sizes 1”, 2” and 4” and is designed to save valuable shelf space by mounting to the wall or by hanger in a refrigerator or freezer. The buffer chamber is machined in 304 Stainless Steel or aluminum and accommodates a variety of temperature sensors or transmitters to interface with all BAS systems.

Literature

Replacement Temperature Probes

Replacement Temperature Probes

Features & Options

  • Plenum-rated Etched Teflons Leads or Cable
  • Probe Lengths from 1.75” to 48”
  • 1/4” Stainless Steel Probes
  • Fits BAPI Duct, Immersion or Remote Sensor Applications
  • Double Encapsulated

BAPI’s Duct, Immersion and Remote temperature replacement probes are easy to field swap to save time and money when the old probe becomes damaged or the sensor requirements have changed.

Replacement Probes feature a standard ¼” stainless steel probe, double encapsulated temperature sensor with minimum 6” 22 AWG Etched Teflon lead wires. The probes are available in various lengths from 1.75” to 48”. The leads are available in a variety of lengths including 18”, 5’, 10’, 15’, 20’, and 25’.

Additional cable options, lead lengths, and probe styles are available upon request. See the order grid to select the probe replacement for your application.

Literature